Chapter 1 Introduction
1．1 Background and Significance
1．2 Foreign and Domestic Researches
1．2．1 Current research of rock bursts
1．2．2 Current research of geostress pre-relief controlled blasting
1．2．3 Current research on numerical simulation of the stability of surrounding rocks
1．3 Main Research Contents and Technical Route
1．3．1 Research contents
1．3．2 Technical route
1．4 Expected Target
1．5 Main Innovations

Chapter 2 Factors and Preventing Methods of Rockbursts
2．1 Definition of Rockburst
2．2 Conventional Evaluation Indexes of Rockbursts
2．3 Establishment of Numerical Model for Analyzing Factors of Rockbursts
2．3．1 Introduction to simulation tools
2．3．2 Model establishment and benchmark simulation
2．4 Impact of Rock's Physical and Mechanical Properties on Rockbursts
2．4．1 Qualitative analysis of the impact of rock's physical and mechanical properties on rockbursts
2．4．2 Quantitative analysis of the impact of rock's physical and mechanical properties on rockbursts
2．5 Numerical Analysis of the Effects of Excavating and Supporting Conditions on Rockbursts
2．5．1 Numerical analysis of the effects of full-face excavation and stepwise excavation on rockbursts
2．5．2 Numerical analysis of the effect of supporting conditions on rockbursts
2．6 Recommended Ideas for Controlling High-intensity Rock Bursts
2．7 Summary

Chapter 3 Mechanism of the Pre-release De-stress Blasting for Rockbursts
3．1 Definition of De-stress Blasting
3．2 Microscopic Mechanism of the De-stress Blasting
3．3 Derivation of the Calculation Formula of Residual Stress after De-stress Blasting
3．3．1 Derivation of de-stress blasting equation on two-dimensional plane
3．3．2 Deduction of the de-stress blasting equation on 3-dimensional plane
3．4 Role of the Stress Pre-release Loose Circle
3．5 Factors Influencing De-stress Blasting Effectiveness
3．6 Summary

Chapter 4 Experimental Study on Rock Mechanics of Surrounding Rocks in Tunnels
4．1 Lab Environment
4．2 Test Methods and Results
4．2．1 Uniaxial compressive strength test
4．2．2 Tensile strength test
4．2．3 Normal triaxial compression test
4．3 Summary

Chapter 5 Optimization of Parameters for Pre-release De-stress Controlled Blasting Based on Numerical Simulations
5．1 Response Platforms of Numerical Simulation Analysis
5．1．1 ANSYS/LS-DYNA numerical platform
5．1．2 FIAC 3D numerical analysis platform
5．2 Calculation Process of De-stress Controlled Blasting
5．2．1 ANSYS/LS-DYNA numerical simulation blasting
5．2．2 Coupling process of ANSYS/LS-DYNA and FIAC 3D
5．2．3 Stress release simulation of de-stress blasting in tunnel
5．3 Scheme for the De-stress Controlled Blasting
5．3．1 Overall plan
5．3．2 Design for orthogonal experiment numerical simulation
5．3．3 Design for single factor numerical simulation
5．4 Result Analysis of Numerical Simulations
5．4．1 Result analysis of orthogonal experiment numerical simulation
5．4．2 Result analysis of single-factor numerical simulation
5．5 Summary
……

Chapter 6 On-site Tests of Stress Release by Borehole De-stress Blasting
Chapter 7 Application of De-stress Controlled Blasting in Double-shield TBM Tunnel

Conclusion and Outlook
Acknowledgements
References